Heating a larger area is convenient and economical with Empire's Direct-Vent units. Delivering ample, room-filling warmth, each furnace is stylishly crafted and fits against an outside wall.

• Total Warmth for a fraction of the cost of electric heat
• Matchless piezo ignition
• Wall thermostat operates without electricity
• Optional automatic blower available
• Cost-efficient installation since no chimney is needed
• Color: Cabinet (Beige), Front Panel (Tan)
• DV-25-SG:
• 25,000 BTU
• Dimensions: 37" W x 11-1/2" D x 27-3/4" H
• 90 lbs shipping weight
• 75 cu. ft/min output
• DV-35-SG:
• 35,000 BTU
• Dimensions: 37" W x 11-1/2" D x 27-3/4" H
• 100 lbs shipping weight
• 75 cu. ft/min output
• Accessories:
• Blower kit:   DRB-1
• Vinyl siding vent kit:  DV-822
• DV-35-SG: Vent tube extension kit  DV-984 (LP), DV983 (N/G)
• Minimum clearances to combustion from:
• Top:  48"
• Each side:  6"
• Bottom of unit to floor covering:  4"
• Gas inlet:
• LP or Natural gas
• Iron pipe size(N.P.T.):  1/2"
• Wall to valve inlet:  4"
• Right side to valve inlet:  N/A
• Center of vent to valve inlet:  Left 17-11/16"
• Valve inlet to floor covering:  N/A
• Venting:
• Wall depth minimum:  4-1/2"
• Wall depth maximum:  13"
• Vent opening in wall:  7-1/2" dia.
• Center of vent to nearest outside corner of building or obstruction:  24"
• Center of vent from any opening through which flue gases could enter a building:  9"
• Bottom of vent above grade:  12"
• Edge of vent to nearest projecting surface:  6"
• Vent projection from outside wall:  5"
• Center of flue to floor covering:  19-3/4"

Safety Control:  Pilot and main burners include automatic shutoff.

Warranty:  Combustion chamber carries a 10-year limited warranty.  All other parts carry a 1-year limited warranty.