 |
|
|
Empire Classic Cast Iron Gas Stoves |
|
|
|
|
|
The Classic and Classic AH Cast Iron Stoves, by White Mountain Hearth, are traditionally styled stoves containing a strikingly detailed ceramic fiber gas log
set. The result is an attractive, efficient heater that lends elegance to any decor.
We offer these versatile stoves in five rich porcelain-finishes, plus a flat black model you can leave as is or paint to match any décor. (Requires high-temperature coatings available from White Mountain Hearth and most hearth stores.) The optional stone inlays and matching floor pads add a touch of elegance. Order your Classic Cast Iron stove for natural gas or propane, and take charge with a thermostat, remote control, or remote control thermostat.
|
Empire
Classic cast iron stoves deliver the finest choices in beauty and
comfort while providing you with a cost efficient source of heat. Available in Vent-Free, Direct Vent and B-Vent Models.
Standard Classic 
- 3 Different Venting styles to make installation easy
-
Choose between five porcelain colors or flat black finish
-
Ceramic fiber log set secures to frame
-
Large fire viewing area
-
Variable heat output
-
Manual, wall switch, wall thermostat or remote control
operation
-
Approved as a heater to the A.F.U.E. standard
-
Operates without electricity
-
Push-button ignition
-
Optional automatic blower
-
Safe operation with auto shut-off controls
-
Temperature Control For All Models- On/Off Millivolt
|
|
|
|
|
Firebox (Requires Stove Casting)
|
|
|
|
|
AH Classic Models
(On / Off Millivolt) |
Model
|
Venting Type
|
|
|
| CIDV-30 |
Vent Free Firebox Burner System
Available In Natural Gas Or Propane
(State On Order What Gas Type)
Standing Pilot / Piezo
Input: 21,000-30,000 BTU
Dimensions: 27-3/4" H x 25-1/2" W x 23" D
Gas Inlet: 1/2"
Click Here To Download |
|
|
 Attention:
All vent runs must have a minimum VERTICAL rise
of two feet. If the vent run is directly behind the appliance, you
must attach Simpson Dura-Vent 36" snorkel, part number SD-
981 on the exterior of the building. See Venting Fireplace, page
15 of the owner's manual.
The installation must conform with local codes, or, in the absence of
local codes, with the National Fuel Gas Code, ANSI Z223.1/
NFPA54* Canadian Installation Code, CAN/CGA B149.
*Available from the American National Standards Institute, Inc., 11
West 42nd St., New York, NY 10036.
State of Massachusetts: The installation must be made by a
licensed plumber or gas fitter in the Commonwealth of
Massachusetts.
|
|
|
|
|
Vent Kits For CIDV-30 Only: 4" x 6-5/8"
|
|
|
|
|
Model
|
Description
|
Fits
Model
|
|
|
| DVKH-1 | Direct Vent Kit for Horizontal Run
Includes:
- Adaptor, Black 24" Pipe,
- Black 11"-14 5/8" Adjustable Pipe
- Round Support Box Wall Thimble Cover
- Wall Thimble
- Horizontal High Wind Square Top
- Black 90° Elbow
|
CIDV-30 |
|
|
| DVKV-1 | Direct Vent Kit for Vertical Run
Includes:
- Adaptor
- (2) Black 48" Pipes
- Round Support Box Wall Thimble Cover
- 0/12-6/12 Pitch Roof Flashing
- Storm Collar
- Ceiling Firestop
- High Wind Vertical Top
|
CIDV-30 |
|
|
| DVKA-1 |
Direct Vent Kit Adaptor |
CIDV-30 |
|
|
Click Here For Extra Vent Piping Accessories
|
|
|
|
|
