Counterflow DVC-35 & DV-55 wall furnaces heat larger areas and use a
minimum amount of floor space. Heat comes out at floor level so you get even distribution of warmth throughout the room. Choose between standing pilot or electronic ignition
models. Optional side register outlet allows heat to disperse from side of
furnace cabinet.
Click Here for Spec Sheet
-
IP model is equipped with electronic ignition
-
Install on outside walls
-
Total comfort for a fraction of the cost of electric heat
-
Convenient 24-volt wall thermostat
-
front panel removes easily for cleaning and service
-
Counterflow blower circulates warmth at floor level
-
Multi-room heating capacity with optional outlet kits
-
Cabinet and front panel: Beige
-
35,000 BTU input
-
Dimensions: 14-1/8" W x 10-3/8" D x 72-1/2" H
-
115 lbs shipping weight
-
Accessories:
-
Side outlet register: SOR-1
-
10" Side outlet kit: SOK-1
-
Vinyl siding vent kit: DV-822
-
Minimum clearances to combustibles from:
-
Top (to ceiling): 4"
-
Each side (to nearest adjacent sidewall): 4" (18" with SOR-1)
-
Floor: 0"
-
Depth unit may be recessed: 9-1/2"
-
Gas inlet:
-
LP or Natural gas
-
Iron pipe size(N.P.T.): 1/2"
-
Floor covering to valve inlet: 4"
-
Venting:
-
Wall depth minimum: 3/4"
-
Wall depth maximum: 10"
-
Vent opening inside wall surface: 7-1/2" diameter
-
Vent opening outside wall surface: 7-1/2" diameter
-
Center of vent to nearest outside corner of building: 12"
-
Edge of vent to nearest projecting surface: 6"
-
Vent projection from outside wall: 6"
-
Center of flue to floor covering: 59-1/4"
Safety Control: Pilot and main burners include automatic shutoff.
Warranty: Combustion chamber carries a 10-year limited
warranty. All other parts carry a 1-year limited warranty.
