Heating large areas is economical with Empire's vented room heaters. The closed front of the RH-50C easily
fits in any decor.
Radiant
and convection heat circulates the warmth while the optional blower
places warm air at floor level to give "barefoot" comfort
throughout the winter season. The hydraulic thermostat needs no
outside
electricity assuring reliable, round-the-clock comfort. Each unit
can be installed easily by any wall with access to a vent.
-
-
RH-50C: Closed front that do not show flames.
-
Total comfort for a fraction of the cost of electric heat
-
Heats without electricity
-
Round outlet draft diverter rotates to either horizontal or vertical position
-
Open design allows maximum flow of heat
-
Matchless piezo ignition
-
Cabinet color: Tan
-
50,000 BTU input
-
Dimensions: 34" W x 16" D x 29-9/16" H, Depth including diverter: 23-3/16"
-
124 lbs shipping weight
-
Hydraulic thermostat temperature control
-
Accessories:
- Optional Blower kit: FRB-3
-
Output, 100 cu. ft./min.
-
Metal floor pad (36' x 21")
-
Minimum clearances to combustion from:
-
Top: 55"
-
Each side: 6"
-
Opposite side (for accessibility): 18"
-
Bottom of unit to floor covering: 0"
-
Draft diverter to wall: 2"
-
Gas inlet:
-
LP or Natural gas
-
Iron pipe size(N.P.T.): 1/2"
-
Wall to valve inlet: 8-1/16"
-
Floor covering to valve inlet: 4-1/2"
-
Center of heater to valve inlet: Left 6-13/16"
-
Venting:
-
Size flue collar (Vertical or Horizontal): 5"
-
Floor to collar on draft diverter in vertical position: 27-3/16"
-
Floor to center of collar on draft diverter in horizontal position:
22-9/16"
- Safety Control: Pilot and main burners include automatic shutoff
on all vented room heaters.
- Warranty: Combustion chamber carries a 10-year limited
warranty. All other parts carry a 1-year limited warranty.
|